Big Block Chevy Driver Side Alternator Bracket

Many people are looking for the big block Chevy driver side alternator bracket, bolts to the engine, and the alternator mounts to it.

The bracket includes a pulley that the alternator belt wraps around.

The bracket is made from heavy gauge steel and powder-coated black for protection.

It is a direct replacement for the stock bracket and fits most big block Chevys.

The car alternator is an essential part of your car’s electrical system.

It creates the power to run all the other electrical components in your car while driving.

There are a lot of different makes and models of cars, so it’s essential to know which alternator bracket will fit your vehicle.

It would be best to make sure that the alternator bracket you choose fits your car’s make and model and the size of the alternator itself.

The alternator bracket bolts to the front of the engine and supports the alternator.

It is usually made of cast aluminum or steel.

The big-block Chevy driver side alternator bracket is a specific bracket used to mount an alternator on a big block Chevy engine.

Alternator Bracket

The alternator bracket bolts to the engine block and supports the alternator.

In some models, it is also used to attach the power steering pump.

The alternator bracket materials are cast iron and aluminum attached to the engine block.

The big-block Chevy driver-side alternator bracket is a part of the engine that supports the alternator.

So, this part is vital for the car’s overall function and should be kept in good condition.

Why Do You Need Chevy Alternator Bracket?

The Chevy Alternator Bracket is a part of the alternator system that attaches the alternator to the engine.

It is responsible for transmitting power from the engine to the alternator, charging the battery, and powering the car’s electrical systems.

Read:  10 Best New Electric Vehicles In 2021

The bracket is made of cast iron and is relatively heavy, making it susceptible to failure if not properly maintained.

Over time, the bracket can become misaligned or corroded, which can cause problems with the entire alternator system.

People installed alternator brackets because they would have sufficient size for the electrical and mechanical water pump in the cylinder head on the driver side.

This bracket bolts to the alternator and the water pump on a big block Chevy engine.

It’s made from cast aluminum and is black anodized for corrosion resistance.

Big Block Chevy Engine

The Chevrolet big block engine is a V8 engine produced by the Chevrolet Motor Division of General Motors between 1955 and 1979.


It is one of GM’s most powerful engines ever put into production.

The big block was available in various displacements, from 348 cubic inches to 454 cubic inches.

The big-block Chevy engine is a legendary powerplant used in street rods by NASCAR racers.

There are many different versions of the big block, and each one has its quirks and characteristics.

A building or modifying a big block Chevy engine can be a challenging but rewarding project.


Many different parts and components go into a big block Chevy, and choosing the right ones is critical for success.

Pistons, crankshafts, and cylinder heads are all essential parts of the engine, and selecting the wrong ones can lead to poor performance or even failure.

How does Alternator Bracket Work?

Chevy alternator bracket allows a serpentine belt drive system on engines with a long water pump.

But I suggest you don’t be tempted by the cheap big block Chevrolet alternator because when you accelerate, it will flex.

Read:  A Teen Driver Survives After Tornado Hits His Chevy Pickup


Therefore, rely on American-made alternator bracket block products that have been tested for toughness and strength even though you have to spend a little more money for it.

That way, you will be satisfied using the durable Chevy bracket alternator.

A tip for you is always to get a lifetime warranty for this product.

A good quality big block bracket alternator will have good material, and they will give you an easy installation guide, including hardware.

Another thing you need to pay attention to is if you buy an alternator bracket driver side for your Chevrolet for you to use in America, the design of the power plug is usually appropriate.

However, you should check this product’s compatibility first before buying it. Sometimes, you will need a converter or adapter according to the user’s location.

The alternator bracket on a big block Chevy engine is a unique piece.

It’s made out of casting aluminum and is quite heavy.

The alternator bracket bolts to the front of the engine, and the alternator hangs off its back.

The bracket has a hole in it that the belt goes around to turn the alternator.


Chrome steel is also used to manufacture the Chevy big-block alternator bracket.

However, you should also check if it will suit a short style or long style water pump?

For the bottom style mount, this alternator bracket usually uses at least two bolts to fasten to the second header bolt, and the other one will be attached to your Chevy cylinder head.

Sometimes these products either don’t come with the hardware installed or may not fit the cast iron exhaust manifold.

So you should check the Chevy big-block alternator bracket product for the driver side before buying it.

Leave a Comment