Dodge Neon Intermittent Starting Problems (Diagnosis and Repair)

Now I’m going to tell you how to deal with Dodge Neon intermittent starting problems. This issue can appear suddenly or related to the age of the old vehicle and the frequency of use. In general, the vehicle’s performance is acceptable until some part is damaged, such as a broken and loose plug-in connection, rust on the terminals, a system with components that need to be replaced, or various other internal problems.

However, don’t ignore the problem with your vehicle because the damage can spread to other systems, and the expense of repairing the car can increase significantly. There is a problem when the engine does not start as usual; even though you have turned the ignition several times, there could be damage to the starter, and it may break.

How To Diagnose Dodge Neon Intermittent Starting Problems

For Dodge Neon owners, problems starting a car are pretty common and can happen to anyone. This will make it more straightforward to diagnose and find a solution to fix it because of the large amount of information circulating.

Now, whether your Dodge Neon starts intermittently due to poor electrical connections or stray parts, however, I will give you some crucial tips for troubleshooting the most common causes of engine starting problems in cars.

Check Your Battery Voltage

The battery voltage must be sufficient to start the motor. So this is an important part that you should check. To check the battery voltage, you can use a relatively cheap voltmeter. That way, you can tell if the battery voltage is causing your Dodge Neon to start intermittently.

Here’s how to measure your car’s battery voltage using a voltmeter:

  • Set the voltmeter to the high battery voltage range. The number is generally 20, or it could be higher. You do it on a DC voltage scale.
  • Turn on the voltmeter and start analyzing the wires on the equipment. Then connect the test lead across the battery terminals. Thus it will form a bridge between resources. Touch the cable marked (-) negative, and do the same for the positive sign (+).
  • Turn on the car’s headlights and pay attention to the battery voltage read by the voltmeter. From there, you can tell if this is what makes your car start intermittently.
Read:  Dodge Durango Won't Start [Check These Parts!]

Batteries that are still functioning well have a voltage of 12.4 V-12.6 V. If you find your battery has a voltage less than that voltage range, you must recharge it. After that, you can start your Dodge Neon engine again and see if everything is working correctly.

Check Vehicle Wiring System

One of the main problems with battery terminals is corrosion, broken, damaged, or loose wires and connections. If that happens, then the flow of electric current in the vehicle system will be disrupted. So, it’s a common problem that many people have with their batteries or car starter systems that rarely get the monthly inspections or regular maintenance they should.

Alright, now is your Dodge Neon battery terminal dirty? If so, I’m giving you easy steps to clean the battery to keep it working properly and prevent your car from starting intermittently.

How to Clean Your Car Battery

You need certain ingredients, but these are easy to get. Mix one tablespoon of baking soda with eight ounces of warm water. Then you can stir it until it’s well mixed.

Disconnect your battery terminals. Then use the solution you made earlier to clean the dirt on the battery pole. Next, clean the head of the battery from acid, debris, and other impurities.

Be careful not to let the cleaning solution reach the filler cap. If that happens, then it could risk damaging other components.

After you have cleaned, you can check the electrolyte level by removing the battery cover. You need to add liquid to keep the volume at the right level.

The last step is that you clean the tray and reconnect the terminal. After that, you can start the engine again.

So, when you experience Dodge Neon intermittent starting problems, you can check the wires and connections. Also, follow the cleaning steps.

Check Your Starter Solenoid

You will also need to check the condition of the solenoid or starter relay. Problems with that part can cause your car to start intermittently. Pay attention, is the positive battery cable connected to the solenoid in good condition? The starter solenoid or relay mustn’t fail.

If you’re not sure if the starter solenoid is bad, here are the signs:

  • When you turn the ignition, nothing happens, or your car does nothing.
  • You may recognize a single click under the hood. The solenoid may try to engage but not connect properly. As a result, the internal parts are stuck, which will cause noise.
  • You may hear repeated clicking sounds from the engine section. The sound you hear will be related to a faulty solenoid or a dead battery.
  • Your car sometimes starts and then dies. What happened was related to the solenoid starter. Thus, you should immediately seek information regarding the service life and determine the eligibility conditions of the part.
Read:  2012-2017 Dodge Ram Key Fob Tricks

How To Check Your Starter Solenoid

First of all, disable the system start by removing the fuse of the fuel pump or wire from the distributor lid.

Next, try listening to the sound coming from your solenoid or starter relay. If it is a weak sound or there is no sound, then the starter solenoid isn’t working correctly, and the wires are not fully connected. But if you hear a loud enough click, then the current is sure to reach the solenoid and work as it should. An improperly connected solenoid can cause your Dodge Neon to turn off intermittently.

You should also check for damaged and contaminated cables that could prevent current from entering the starter motor. But if you check the condition of the motor and cables carefully are still in good condition, they are not the cause of your car turning on intermittently.

Some other causes, such as low battery voltage, will not provide enough power to start your car. Likewise, a damaged fuse can cause the starter not to function normally, and as a result, you cannot start your car. The power that should reach the starter solenoid or battery is blocked due to blown wires or fuses.

Also, your alternator could be in trouble due to lack of power and not starting your car. If it can’t recharge the battery to provide sufficient power to the vehicle’s electrical system, it will cause performance disturbances and intermittent start. Furthermore, the starter could be the last part of a bad solenoid. The car’s problem starting intermittently can occur when it lacks power due to a malfunction in the starter.

Read:  Car Cranks But Won't Start [Timing Belt Is Broken - Fix It 100%]

Check Your Starter Motor on Your Dodge Neon To Fix The Problems

Some of the main components of the starter motor are:

  • Solenoid: Starter, Plunger, cap
  • Coil: Armature, Field
  • Actuator shaft
  • Drive pinion: Clutch, Gear
  • Brushes
  • Commutators
  • Main housing

A faulty starter motor setting can cause the Dodge Neon to start intermittently and then die. You may also need to check the condition of the starter motor. First, make sure that there are no loose connections on the starter mounting bolts. The starter drive will not turn the flywheel if the fixing bolt is loose. You will even hear a relatively loud grinding sound. If you know the bolts are in place, you should also remove the starter motor. Also, check the connections carefully. Make sure the flywheel is cranking the engine at the appropriate level.

You will need to use a screwdriver to turn the pinion gear to correctly see if the equipment is moving in one or both directions. If you know it’s moving in both directions or not moving correctly, then replace your starter. Replacement of the starter can solve the car’s problem starting intermittently as long as that is the cause.

Check Your Engine Flywheel

The engine flywheel is within the transmission and the engine.

It will operate the starter pinion gear so that the engine will starts.

The transmission should be neutral when you remove the starter motor. If the alternator and serpentine belt have a problem due to the crankshaft pulley, you have to turn the center bolt to check it.

Also, check the speed of the flywheel carefully and make sure the gears are in good condition. Damage to the flywheel teeth can cause your car to start intermittently.

Conclusion

A diagnosis to determine the exact reason for Dodge Neon intermittent starting problems will prevent your car from getting worse in the future. Knowing a poor starter can help your vehicle stay at a high-performance level for longer.

Leave a Comment