Today we’ll tell you about the old 2014 Dodge Ram 1500 battery replacement. So, you’re doing a relatively simple job.
You’re going to replace up the battery in it.
Maybe your battery is more than five or seven years old, and you’re having a problem where the truck sits for days or even weeks while the battery runs out.
If the Dodge Ram 1500 is having trouble with one of the wires, you’ll be worried about voltage leaks somewhere.
The most important thing is that you are pretty sure based only on battery life, and its standard usage period will end.
Typically, these days, the average battery lasts five years or less, and you’re in luck if your 1500 Ram battery life is more than that.
Even though the battery is relatively clean because it’s always in a heated garage and hasn’t been drained, but when you find it draining out itself, you know it’s time to check or replace it.
2014 Dodge Ram 1500 Battery Specifications and Prices
So you’re gonna change it out and put in a new battery. You can replace the existing dying unit with a new battery like AGM, Super Start, Kirkland, etc. The price range is $160 – $ 200.
We think the reason is essentially based on price, availability, experience, and other user testimonials about the 2014 Ram 1500 battery.
Every brand claims its battery product to be the best quality, but the user experience is a reality, and you need to consider it.
You can choose H7 group size and 800 – 900 CCA (Cold Cranking Amperage), which is the recommended model for this, and that’s basically how it fits within the truck.
How to Replace the 2014 Dodge Ram 1500 Battery
- Using socket number 10 on the extension, remove the negative cable first. This will help prevent a short circuit when you are about to disconnect the battery.
- Remove the positive side wire.
- Remove bolt number 10 and bracket that is holding the lip of the battery down. For this, you may need a longer extension.
- Remove the old battery. Remember, it is quite heavy, so keep prioritizing safety.
- Put the new battery in and make sure it is firmly in place and tight.
- Replace the battery bracket with screw number 10 that you previously removed.
- Make sure you reinsert the battery covers before attaching cables.
- You can rub a little lithium grease on the battery posts to prevent corrosion and keep it clean. But before that, use a battery post cleaner to remove some sort of corrosion-protective coating from the factory. You always want to make sure there is good contact between the cable and the battery.
- Clean the end of the cable that will connect to the battery using a cleaning wire brush. If there is dirt or corrosion on that part, you should dip it in the baking soda mixture to neutralize the battery acid. After that, also apply a little lithium grease to prevent corrosion.
- In reverse, when you remove the battery, now stick and fasten the positive wire first.
- Stick the negative cable well and tight
The battery is fully charged from the factory, but since it’s been on the store shelf for a few months, I suggest you start your vehicle for a while and make sure the battery is charged correctly.
Using a voltmeter, you can make sure the battery is charging smoothly and there are no problems with the alternator.