Home Info Car Radiator Hose: Function, Maintenance, and Replacement

Car Radiator Hose: Function, Maintenance, and Replacement


The car radiator hose is a component that uses rubber as the primary material. But, after some time, this rubber can be fragile or cracked. As a result, the radiator hose leaked and even ripped. As you know, the radiator is a crucial component of the whole system in the vehicle’s engine, including your car.

The car radiator will reduce engine heat throughout the combustion process.

If the radiator has a problem, the engine temperature will be too high and cause damage to the components. This condition is known as engine overheat, which will make the car stop, and your trip will be interrupted.

Just like other components in the engine room, the radiator also consists of several parts. Some of them are radiator coolant and radiator hose. Well, this time, we will discuss the radiator hose.

Broken radiator hose

How do you take care of the radiator hose so that the condition is always excellent and that service life is longer? What should you consider when replacing a radiator hose? Please read further.

Car Radiator Hose Function

The radiator hose serves to drain cooling fluid (radiator coolant). The fluid radiator will flow into the engine while reducing excess engine heat through the combustion process.

Car radiator hose

Coolant flows from the radiator to the lower-hose then into the engine when the thermostat is open.

After leaving the engine, the hot liquid will return to the radiator through the upper-hose. However, when the thermostat closes, the radiator fluid from the hot engine will accumulate in the radiator until the thermostat reopens.

Also, the radiator hose can reduce vibrations from a working machine.

Read:  Toyota Tundra Horsepower and Torque (1999 - Present)

So, the hose will prevent the vibration from going to the radiator. To reduce engine vibration, then most car radiators are placed at a certain distance from the engine block. Thus, the engine vibration will not directly hit the radiator walls.

How to Take Care of a Car Radiator Hose

With a rubber base material, the radiator hose also has a lifetime. Generally, after your car is more than five years old, the radiator hose will be a problem because the rubber starts to become brittle.

There is only one problem with the radiator hose: leakage. Therefore, you should check the condition of the radiator hose on cars over five years old. Fragile rubber is a significant cause of hose leakage in hot engine room conditions.

The most simple tip when caring for a car radiator hose is always to keep it clean.

Don’t leave dirt on the radiator hose accumulated.

Besides, make sure that no rodents can bite the hose and cause leakage.

Also, you need to check the condition of the radiator hose periodically. If the conditions are dirty, wash with water and wipe clean. Do not use detergent or other cleaning fluids because chemical liquids might damage the rubber’s elasticity on the radiator hose.

Note the fastening clamps on the radiator hose. Is it still in good condition or not?

Radiator hose clamps

The clamps must make the hose stick tightly to the radiator and also the engine part of the car.

However, the binder clamps’ metal base makes it easy to corrode or rust and causes its strength to decrease. If the radiator hose clamps look rusty, you should immediately replace them with new, high-quality clamps.

Read:  2018 Jeep Grand Cherokee Oil Change

Car Radiator Hose Replacement

When the radiator hose is fragile, cracked, leaking, or even torn, you have to change it with a new one. There are different prices for new radiator hoses depending on the brand and type of car. While the cost of radiator hose clamps also varies depending on the material of the clamps

However, some car owners modify it by buying an aftermarket radiator hose. Usually, they do it because car owners want color variations in the engine room. Most aftermarket radiator hoses have a variety of colors that you can choose according to taste. Besides, this replacement process can occur due to changes in engine specifications from the manufacturer’s standard specifications, thus requiring better radiator water intake through radiator hoses with better durability.

Some automotive aftermarket manufacturers in the US also have radiator hose variants. However, before deciding to buy it, you must be careful to suit your needs. Also, consider whether you use the car as a daily vehicle, on the race track, or as a modification contest participant.

If you use a car for daily activities, you should choose an aftermarket radiator hose thick and elastic enough. The choice of hose thickness depends on engine specifications.

The proper thickness will make the radiator hose resistant to engine heat pressure and easy to bend when put at a narrow machine angle.

Also, make sure the hose’s length and diameter are under the specifications of the car’s engine to eliminate the risk of overheating.


Please enter your comment!
Please enter your name here